Power Factor Correction Equipment, Capacitor, Harmonic filters

Products - Low Voltage - Power Factor Correction - Static

R500 Packaged Capacitor

c/w

Electrotek Model R500
Complete with:	wire nuts or terminal block HRC fusing on 100 kVAr+ NEMA 3R galvanized enclosure

Electrotek Model R500

Complete with:

wire nuts or terminal block

HRC fusing on 100 kVAr+

NEMA 3R galvanized enclosure

Electrotek Model R500
	HRC fusing (option for under 100 kVAr, standard for over 100 kVAr) - R500f HRC fusing (option for under 100 kVAr, standard for over 100 kVAr) - R500f HRC fusing (option for under 100 kVAr, standard for over 100 kVAr) - R500f LED current indicators contactors, c/w: pre-charge coils - R500s inrush current limiters iron core 3 phase reactors for harmonic contaminated environments disconnect device NEMA 1, 2, or 12 galvanized enclosures powder coated enclosures

Electrotek Model R500

HRC fusing (option for under 100 kVAr, standard for over 100 kVAr) - R500f

LED current indicators

contactors, c/w: pre-charge coils - R500s

inrush current limiters

iron core 3 phase reactors for harmonic contaminated environments

disconnect device

NEMA 1, 2, or 12 galvanized enclosures

powder coated enclosures

Manufactured by	Vishay Electronic GmbH (Roederstein), Germany
Voltage Ratings	240 - 999 V
Maximum kVAr per 3 phase casing (60 Hz)	13.6 kVAr @ 208V (rated 16.3 kVAr @ 240V) 25.0 kVAr @ 480V (rated 30.0 kVAr @ 525V) 25.0 kVAr @ 600V (rated 33.0 kVAr @ 690V) 10.0 kVAr @ 600V (rated 28.0 kVAr @ 999V)
Specifications	UL and cUL, CSA CAN3-C155-M84 (1986), CSA C22.2 No. 190-M1985, IEC Publication 831-1, 831-2, VDE 560-47, 560-47, EN60831-1, EN60831-2
Insulation (wet and dry options)	wet, ‘Ro’ series: non-PCB, natural oil impregnant, flash / ignition points 285/315°C dry, ‘Rg’ series: non-PCB, dry / gas agent ‘Ro’ and ‘Rg’ series are both biodegradable and non-toxic.
Electrodes	vacuum-metallized on one side of the plastic film
Ambient Temperature	-40°C to +45°C; storage temperature -40°C to +60°C
Inrush Current	maximum 300 times rated current
Loading Capacity	1.10 times rated voltage 1.30 times rated current 1.50 times rated output
Frequency Ratings	50 or 60 Hz
Capacitor Casing	seamless aluminum
Losses	≤ 0.25 Watts per kVAr
Discharge Resistors	50V or less in one minute after disconnection of supply voltage
Dielectric	polypropylene film
Safety Features	self-healing over pressure tear-off fuse / pressure sensitive circuit interrupter / internally fused up to 10kAIc, grounding / mounting stud at base of capacitor for easy mounting / replacement
Special Applications	designed for use in harmonic filters